Maintenance Schedule & Daily Check List - Sunrise Medical Oxford Ascend Manuel De L'utilisateur Et Garantie

E n g l i s h
9. MAINTENANCE SCHEDULE & DAILY CHECK LIST
All Oxford/Hoyer products are designed for minimum maintenance, however some safe-
ty checks and procedures are required. A schedule of DAILY tasks are detailed below.
Daily checks and a six monthly service, inspection and test will ensure a lift is kept in
optimum safe working condition. A list of spare parts is available upon request.
The LOAD TEST and certification should only be carried out by qualified personnel or
an authorised service agent / dealer.
DAILY CHECK LIST: Sunrise Medical strongly recommends the following checks be car-
ried out on a daily basis and before using lift.
• MAKE sure the lift moves freely on its castors.
• EXAMINE the spreader bar (cow horns) is firmly attached to the boom.
• EXAMINE the sling hooks and attachment clips on the spreader bar and boom for
excessive wear.
• MAKE sure the legs open and close correctly.
• OPERATE the hand control to confirm the boom raises and lowers satisfactorily.
• ON electric powered lifts check the operation of the emergency stop button.
• EXAMINE slings for fraying or other damage. DO NOT use any sling if damaged
• CONFIRM the lift is not giving a low battery alarm when the hand control is
operated. If the alarm sounds, DO NOT use and place on charge immediately.
MAINTENANCE, INSPECTION AND TEST
Sunrise Medical recommend a thorough inspection and test of the Oxford/Hoyer Ascend
lift and lifting accessories, slings, scales etc is carried out on a regular basis.
Inspection frequency varies from country to country so you must check with your deal-
er or local government agency as appropriate regarding how often an inspection is
required. The examination and test should be conducted according to the recommenda-
tions and procedures below. Sunrise Medical recommends maintenance, inspection and
certified testing is carried out by authorised service agent / dealers only.
NOTE:
These recommendations are in compliance with the requirements of 1998 No2307 Health
and Safety: The Lifting Operations and Lifting Equipment Regulations 1998. This is a UK
regulation. Outside the UK please check your local country requirements.
17
294000.10022 Rev. B