Sunrise Medical Oxford Ascend Manuel De L'utilisateur Et Garantie page 6

6
1.
Place the chassis in a clear space and apply the rear bakes. Attach the foot tray to
the base using the location holes positioned on tbe base casting.
2.
Fit the mast and boom assembly into the chassis socket.
3.
Tighten the mast assembly with the mast-locking device, which is located at the
front of the chassis.
Avoid trapping fingers. Keep fingers away from the end of the mast when
inserting into the chassis socket. Full engagement of the mast is indicated
by the label on the side of the mast. The electric leg operation will not func-
tion unless the mast is fully engaged.
294000.10022 Rev. B
WARNING
E n g l i s h