Time Scheduling Management - AERMEC CC2 Manuel D'utilisation/Installation

Table des Matières

Les langues disponibles

5.8.

TIME SCHEDULING MANAGEMENT

Press the button

on the homepage to access the scheduling management page.

•

Open scheduling: When the icons and text become blue, the schedule is open. When the icons and text become grey, the

schedule is closed. With the schedule open, the centralised controller automatically sends the control order based on the

•

Schedule modification:

Press

to access the schedule modification page.

Press

to save the schedule settings.

The schedule control parameters setting method is the same as the control of the single indoor unit.

Add systems, press the "Add Unit" button to access the systems selection page. The user can set the indoor unit that functions

according to the current schedule.

•

Repeat schedule: Press the "Repeat Setting" button to access the Settings page. The user can set the scheduled operation

repeatedly according to the weeks.

Fig. 5.7 Schedule modiﬁ cation page

time and parameters set by the schedule.

Fig. 5.6 Schedule page

Table des Matières