Buttons Operating Instructions - AERMEC CC2 Manuel D'utilisation/Installation

Info
Cancel
Down
Right
Go to the
previous page
Back
Block
4.3.

BUTTONS OPERATING INSTRUCTIONS

The centralised controller uses a capacitive touch screen so the user can start the units simply by touching the screen. The buttons
on the screen are presented as follows:
• Icon: The Icon button can be started directly. See section 4.2 for more details.
• Icon + Key: Depending on the meaning of words, turns on or off or selects a particular function or accesses a certain page.
This type of button has 2 or 3 status types depending on the specific function.
Status meaning (example with the Sleep button):
A light colour indicates disabled/greyed out. The Sleep function is not valid and can not be selected. The cases differ
depending on the model.
A normal colour indicates inactive/not selected. The Sleep function is not active. The Sleep function activated by pressing
the grey Sleep button.
A dark colour indicates active/selected. The Sleep function is active. The Sleep function deactivates by pressing the orange
Sleep button.
• Scroll: The group and the setting page can be scrolled up and down.
• Scroll bar: Press and hold the scroll bar to drag up/down or left/right and change the value. For example, the backlight
setting etc.
• Zone button: On the scheduling management pages, as shown in fig. 4.2 (Scheduling homepage) each rectangular box
represents a zone button.
Press this button to access the Information page
Press this button to cancel the group or scheduling
Press this button to decrease the value or select the next option
Press this button to access the next page
On the indoor unit classification page, press this button to move the selected indoor unit back by one
On the indoor unit classification page, press this button to move the selected indoor unit back by one
Press this button to execute the shield function of the wired controller to cancel the operation
Pressing the zone button will display the corresponding function or the corresponding page.
Fig. 4.2 Zone button on the scheduling homepage
page
position
EN
33