Management Of Groups - AERMEC CC2 Manuel D'utilisation/Installation

• Temperature setting: Press the up or down button to adjust the temperature. Press this button once to increase or decrease
the temperature by 1° C. By pressing or holding down this button, the temperature increases/decreases continuously.
• Fan speed setting:
humidifi cation mode,
.
• Swing function setting: The swing function is activated or deactivated by pressing the "Up & Down Swing" or "Left & Right
Swing" button.
• Sending commands: press button
5.7.

MANAGEMENT OF GROUPS

Press on the homepage to access the group function page.
No. Name
1
Group display
2
Name of the group
3
Add group
4
Group management
5
Modify group
6
Order indoor unit
• Group control: Press the button
control. Press button
• Modify group: Press to access the Modify group page. The user can set the name of the group and add an indoor unit to
the group. Press to save the settings. N.B.: 1 indoor unit can be added in a maximum of 5 groups
• Indoor unit classification: Press the button
• Add group: Press the "ADD
name of the group and add an indoor unit to the group.
• Delete group: Press to delete the selected group.
Press or drag the fan
the fan speed is
to send the selected settings to all the system.
Fig. 5.5 Groups page
Displays in separate pages the list of groups managed by the centralised controller. Turn
the page by scrolling up or down.
View the name of each group.
Press the button to add a group.
Press the button to access the Group control page.
Press the button to access the Modify group page.
Press the button to access the group classification page.
to access the Group control page. The control parameters are the same as the single unit
to sent the group control order.
to access the indoor unit classification page.
" button to add new groups. The modify group page will then appear. The user can set the
speed scroll bar to set
set to a low level
Function
the fan speed. NB: With
and can not be
Select an indoor unit, press
the left or right button at the
bottom of the screen to
switch to the indoor unit
display.
EN
de-
changed
37