Information On 'Field-Adjustable Trip Points' And 'Advanced Grid Features; Fcc / Rss Compliance; Insulation Monitor/Interruption, Insulation Monitoring - Fronius Symo Serie Instructions De Service

Masquer les pouces Voir aussi pour Symo Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Proper use also means
-
-
-
When configuring the photovoltaic system, make sure that all components are operating
completely within their permitted operating range.
All measures recommended by the solar module manufacturer for maintaining solar mod-
ule properties must be followed.
Follow all grid operator regulations regarding grid power feed and connection methods.
Information on
The inverter is equipped with 'Field adjustable trip points' and 'Advanced Grid Features'.
'Field-adjustable
For further information, please contact 'Fronius Technical Support' at the following email
trip points' and
address: pv-support-usa@fronius.com.
'Advanced Grid
Features'
FCC / RSS Com-
pliance
Insulation Moni-
The inverter is equipped with the following safety features as required by UL 1741 and the
tor/Interruption,
National Electrical Code:
Insulation Moni-
toring
10
carefully reading and obeying the instructions and all the safety and danger notices in
the Operating and Installation Instructions
compliance with the maintenance operations
installation as specified in the Installation Instructions
FCC
This device corresponds to the limit values for a digital device of class B in
accordance with Part 15 of the FCC regulations. The limit values should pro-
vide adequate protection against harmful interference in homes. This device
creates and uses high frequency energy and can interfere with radio com-
munications when not used in accordance with the instructions. However,
there is no guarantee against interference occurring in a particular installa-
tion.
If this device interferes with radio or television reception when turning the de-
vice on and off, it is recommended that the user solve this with one or more
of the following measures:
-
adjust or reposition the receiving antenna
-
increase the distance between the device and the receiver
-
connect the device to another circuit, which does not include the receiv-
er
-
for further support, please contact the retailer or an experienced radio/
TV technician.
Industry Canada RSS
The device corresponds to the license-free Industry Canada RSS stan-
dards. Operation is subject to the following conditions:
(1) The device may not cause harmful interference
(2) The device must accept any interference received, including interfer-
ence that may cause undesired operation.

Publicité

Table des Matières
loading

Table des Matières