Fronius Symo Serie Instructions De Service page 24

Installation via Solar.web App
The start page of the Setup wizard appears.
The Technician Wizard is designed for the installer and includes standard-specific settings.
Running the Technician Wizard is optional.
If the Technician Wizard is run, it is essential to note down the assigned service password.
This service password is required to configure the DSO Editor menu item.
If the Technician Wizard is not run, no specifications for power reduction are set.
The Fronius Solar Web Wizard must be run.
6
The Fronius Solar.web start page appears.
or
The Fronius Datamanager 2.0 website opens.
7
24
Download Fronius Solar.web LIVE or
4
Solar Web Pro app
Run Fronius Solar.web App
5
Run the Fronius Solar Web Wizard and follow the instructions
If necessary, run the Technician Wizard and follow the instructions
Installation via Web Browser
Connect the end device to the WLAN
4
Access Point
SSID = FRONIUS_240.xxxxx (5 - 8
digits)
- Search for a network with the
name "FRONIUS_240.xxxxx"
- Establish a connection to this
network
- Enter password 12345678
(or connect end device and inverter
via Ethernet cable)
Enter in the browser:
5
http://datamanager
or
192.168.250.181 (IP address for
WLAN connection)
or
169.254.0.180 (IP address for LAN
connection)