Publicité
INSPECTION REGISTER
The validation of the commissioning is intended to verify the proper operation of the crane and of the accessories, as
well as the proper completion of all the procedures, so as to ensure correct commissioning of the crane and installation.
The installer / owner/ employer certify, by this document upon delivery, that the testing took place, that the envisaged
procedures and the practical demonstration of the use of the equipment as well as the explanation of the operator's
manual were performed. This document must be filled in and signed by the installer, by the customer / owner / employer
or by anyone authorized by him, who is requested to apply directly to EFFER in case of non-attendance by the installer.
AT EVERY CHANgE OF OWNERsHIP OF THE EQUIPMENT OR AFTER ANY NEW COLLOCATION OF THE CRANE
ONTO A dIFFERENT VEHICLE A dOCUMENT sIMILAR TO THIs MUsT TO BE FILLEd IN BY THE INsTALLER /
sELLER.
0. LAWs ANd REgULATIONs
The installer must grant the compliance of the installation of the crane and the accessories, according to rules in force in the country of use.
The installer has complied with all the current information provided by EFFER.
1. dATA IdENTIFICATION
CE marking Nameplate by the manufacturer and installer:
Presence
Fixing
Legibility
. MANUALs
Operation and maintenance manual for crane - Annex
Operation and maintenance manual for set up - Annex
Operation and maintenance manual for accessories -Annex
. sAFETY dEVICEs - CONTROL sEATs
Monitoring proper functioning of::
stop valves
Limiting device
stabilizers position device (stability control device)
stop device(emergency)
L imiting rotation device for unstable area
6. FUNCTIONAL ANd OVERLOAd TEsTs
Lifting of rated loads
static stability check in the areas with increased loads according to
EFFER instructions
Noise level check with phonometric test according to standards and
according to local laws)
Check operation of accessories
8. INsTALLER's REPORT
According to the operations above performed and listed, the undersigned Mr. ....................................... (Head of the validation of the start up) states that:
THERE WERE NO defects
The equipment complies with the following laws / regulations:
IT CAN be put into service
date: ...................................................................................... signature of the INsPECTOR............................................... stamp
Name of the INsPECTOR ..........................................................
9. REPORT OF THE OWNER / EMPLOYER
The undersigned Mr. ...........................................with qualification ..................................................(
certify that the above listed operations have been executed under his/her supervision, that he/she received documents and materials supplied, and that:
THERE ARE NO reservations to take delivery of the machine
date ...................................................
Name and signature ............................................................
10. s PECIAL sITUATIONs
The above operations NO. .....................................................
WERE
WERE NOT
This document and the accompanying documentation was delivered to the Responsible of withdrawal, Mr................................
This document and the accompanying documentation was sent to the Owner / Employer, Mr...............................
date ...................................................
Name and signature of the inspector..........................................................
VALIDATION OF COMMISSIONING
performed in presence of the
Owner / Employer / Appointee
Y
1
dOCUMENTs
EC declaration of conformity issued by the manufacturer (copy) - Annex
EC declaration of conformity issued by the installer (original) - Annex
EC declaration of conformity for accessories (original / copy) - Annex
documents provided by local national rules
. PLATEs
Lifting capacity plates, instructions and warnings according to operation and
maintenance manual:
P resence
Legibility
Apply No. __capacity diagrams plates in position visible to the operator
stabilizers locking device for transport
d evice for crane transport correct position
Winch safety devices
general safety devices
Command seats
7. OPERATOR TRAININg FOR CRANE UsE ANd sERVICE
Instructions for use of the crane
Instructions for use of accessories
M aintenance instructions
Instructions on the Inspection Register
defects WERE DETECTED.
Machinery directive 2006/2/EC
IT CAN NOT be put into service.
Appointed by Mr. ...................................owner / employer
THERE are reservations to take delivery of the machine.
date ...................................................
Name and signature
Owner / employer ............................................................
The above operations NO. .....................................................
WERE
WERE NOT
date ...................................................
signature
of the Responsible of withdrawal............................................................
MO00062_1
copy for the installer
Fill in: Installer
Fixing
__________________
Company
performed in presence of the
Owner / Employer / Appointee
Publicité
Chapitres
