Installation Instructions - Truma Trumatic S 2200 Mode D'emploi

Installation
instructions
Please unfold sheet
with diagrams!
Installation and repair jobs
on the heater are only to
be carried out by an ex-
pert.
The consequences
of failing to adhere
to the installation instruc-
tions or installing the
equipment incorrectly are
potentially fatal!
Declaration of conformity:
CE-0085AP0324.
EEC Type Approval:
Information regarding in-
stallation in Germany:
not to be in-
stalled in motor vehicles
that are
intended for approval in
Germany.
For other countries
It is not permissible to
install the heater inside
buses or in vehicles for
the transportation of
hazardous goods.
will cancel the
warranty and indemnify
Truma from any liability
claims.
The first year of operation
must be marked on the
data plate.
Choice of location
3. Exhaust ducts and
cowls must be installed in
such a way that exhaust
gas cannot find its way in-
to the vehicle. The intake
duct for combustion air
(with exhaust duct routing
via the roof) is not to be in
the spray area of the
wheels, attach a spray
guard, if necessary.
Fig. E:
To ensure safe operation it
is absolutely necessary
that the cowls for exhaust
gas and combustion air be
placed at the prescribed
height.
4. Only for exhaust duct
routing via the roof:
The specified dimensions
must be observed exactly!
3. Only for exhaust duct
routing via the roof:
The specified dimensions
must be observed exactly!
Exhaust gas and
combustion air
routing through the
side wall
Only Truma stainless steel
flue gas pipe AE 3 may be
used with the Trumatic
S 2200
Fig. F: