Maintenance And Cleaning; Declaration Of Conformity (Doc) - Conrad Profi Mode D'emploi

14. Maintenance and Cleaning

The product requires no servicing apart from replacing the rechargeable battery. Servicing or
repair must only be carried out by a specialist or specialist workshop. There are no parts that
require maintenance by you inside the product. Therefore, never open it (except for the procedure
described in these operating instructions for inserting or replacing the batteries).
To clean the exterior of the weather station or the outdoor sensor, a dry, soft and clean cloth
is sufficient.
Do not push too hard on the weather station or outdoor sensor display, as this may cause scratch
marks or lead to faulty or even destroyed displays.
Remove dust on the weather station with a long-haired, soft and clean brush and a vacuum
cleaner.
Use a slightly damp soft cloth to remove stronger contamination from the outdoor sensor.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing (discolouration) or even impair function.

15. Declaration of Conformity (DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product complies with the fundamental requirements and the other relevant regulations of the
directive 1999/5/EC.
The compliance statement for this product is available at www.conrad.com.
69