Moon Phase Display - Conrad Profi Mode D'emploi

Setting the Current Weather
For the weather station to be ale to best calculate a weather forecast based on the current weather,
set the current weather from time to time.
Proceed as follows:
• Hold down the „WEATHER/HISTORY" button (B5) for three seconds until the sound signal is
issued and the icons for the weather forecast flash.
• Set the current weather with the button „+ (°C/°F)" (B6) or „-" (B7).
• Push the button „WEATHER/HISTORY" (B5) briefly to confirm. This saves all settings and leave
the setting mode (alternatively, wait for a few seconds without pushing a button).
The current weather should also be set again when the altitude of the site of setup of
the weather station changes.
• After setting the current weather situation, the weather station will display the first forecast after
about 6 hours.
Frost Alarm
If any outdoor sensor measures a temperature between +3 °C and -2 °C, a snowflake icon
appears to the right of the display of the weather forecast.
Snowfall
If an outdoor sensor measures a temperature below 0 °C, the weather station displays snowflakes
(instead of raindrops) when forecasting precipitation.
k) Moon Phase Display
new moon
62
waxing moon full moon waning moon