Declaration Of Conformity (Doc); Maintenance And Cleaning - Conrad S3318P Mode D'emploi

15. Declaration of Conformity (DOC)

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product complies with the fundamental requirements and the other relevant regulations of the
directive 1999/5/EC.

The declaration of conformity for this product is available at www.conrad.com.

16. Maintenance and Cleaning

The product is maintenance-free for you. Servicing or repair must only be carried out by a
specialist or specialist workshop. There are no parts that require maintenance by you inside
the product. Therefore, never open it (except for the procedure described in these operating
instructions for inserting or replacing the batteries).
A dry, soft and clean cloth is sufficient for cleaning the outside of the weather station.

Do not apply too much pressure to the display; this can cause scratch marks or failures
of the display.
Remove dust on the weather station with a long-haired, soft and clean brush and a vacuum
cleaner.
To remove contamination at the outdoor sensor, use a soft cloth slightly moistened with
lukewarm water.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical
solutions, since these may damage the casing or even impair function.
59