Roland Fantom XR Mode D'emploi page 242

Implémentation MIDI
❍Hold 1 (Controller number 64)
Status 2nd byte
BnH 40H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
* Not received when Tone Receive Hold-1 parameter (PATCH/CTRL or RHYTHM/
CTRL) is OFF.
* Not received in Performance mode when Receive Hold-1 parameter (PERFORM/MIDI)
is OFF.
❍Portamento (Controller number 65)
Status 2nd byte
BnH 41H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Portamento Switch parameter (PERFORM/PART) will
change.
❍Sostenuto (Controller number 66)
Status 2nd byte
BnH 42H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍Soft (Controller number 67)
Status 2nd byte
BnH 43H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍Legato Foot Switch (Controller number 68)
Status 2nd byte
BnH 44H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Legato Switch parameter (PERFORM/PART) will change.
❍Hold-2 (Controller number 69)
Status 2nd byte
BnH 45H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* A hold movement isn't done.
❍Resonance (Controller number 71)
Status 2nd byte
BnH 47H
n = MIDI channel number:
vv= Resonance value (relative change):
* In Performance mode the Part Resonance Offset parameter (PERFORM/PART) will
change.
❍Release Time (Controller number 72)
Status 2nd byte
BnH 48H
n = MIDI channel number:
vv = Release Time value (relative change):
* In Performance mode the Part Release Time Offset parameter (PERFORM/PART) will
change.
❍Attack time (Controller number 73)
Status 2nd byte
BnH 49H
n = MIDI channel number:
vv = Attack time value (relative change):
* In Performance mode the Part Attack Time Offset parameter (PERFORM/PART) will
change.
246
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63),
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63),
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63),
❍Cutoff (Controller number 74)
Status 2nd byte
BnH 4AH
n = MIDI channel number:
vv = Cutoff value (relative change):
* In Performance mode the Part Cutoff Offset parameter (PERFORM/PART) will change.
❍Decay Time (Controller number 75)
Status 2nd byte
BnH 4BH
n = MIDI channel number:
vv = Decay Time value (relative change):
* In Performance mode the Part Decay Time Offset parameter (PERFORM/PART) will
change.
❍Vibrato Rate (Controller number 76)
Status 2nd byte
BnH 4CH
n = MIDI channel number:
vv = Vibrato Rate value (relative change):
* In Performance mode the Part Vibrato Rate parameter (PERFORM/PART) will change.
❍Vibrato Depth (Controller number 77)
Status 2nd byte
BnH 4DH
n = MIDI channel number:
vv = Vibrato Depth Value (relative change):
* In Performance mode the Part Vibrato Depth parameter (PERFORM/PART) will change.
❍Vibrato Delay (Controller number 78)
Status 2nd byte
BnH 4EH
n = MIDI channel number:
vv = Vibrato Delay value (relative change):
* In Performance mode the Part Vibrato Delay parameter (PERFORM/PART) will change.
❍General Purpose Controller 5 (Controller number 80)
Status 2nd byte
BnH 50H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* The Tone Level parameter (PATCH/TVA) of Tone 1 will change.
❍General Purpose Controller 6 (Controller number 81)
Status 2nd byte
BnH 51H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* The Tone Level parameter (PATCH/TVA) of Tone 2 will change.
❍General Purpose Controller 7 (Controller number 82)
Status 2nd byte
BnH 52H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* The Tone Level parameter (PATCH/TVA) of Tone 3 will change.
❍General Purpose Controller 8 (Controller number 83)
Status 2nd byte
BnH 53H
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* The Tone Level parameter (PATCH/TVA) of Tone 4 will change.
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (-64 - 0 - +63)
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH