Table des Matières
Publicité
Implémentation MIDI
1. Receive Data
■Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (PERFORM/
PART) is OFF.
●Note off
Status
2nd byte
8nH
kkH
9nH
kkH
n = MIDI channel number:
0H - FH (ch.1 - 16)
kk = note number:
00H - 7FH (0 - 127)
vv = note off velocity:
00H - 7FH (0 - 127)
* Not received when the Tone Envelope Mode parameter (PATCH/CTRL and RHYTHM/
CTRL) is NO-SUS.
●Note on
Status
2nd byte
9nH
kkH
n = MIDI channel number:
0H - FH (ch.1 - 16)
kk = note number:
00H - 7FH (0 - 127)
vv = note on velocity:
01H - 7FH (1 - 127)
●Polyphonic Key Pressure
Status
2nd byte
AnH
kkH
n = MIDI channel number:
0H - FH (ch.1 - 16)
kk = note number:
00H - 7FH (0 - 127)
vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Poly Key Pressure parameter
(PERFORM/MIDI) is OFF.
●Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (PATCH/CTRL1-4), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (SYSTEM/CONTROL) is selected, the specified effect will apply if Patch
Control Source 1, 2, 3 or 4 parameter (PATCH/CTRL1-4) is set to SYS-CTRL1, SYS-
CTRL2, SYS-CTRL3 or SYS-CTRL4.
❍Bank Select (Controller number 0, 32)
Status
2nd byte
BnH
00H
BnH
20H
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm, ll = Bank number:
00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received in Performance mode when the Receive Bank Select (PERFORM/MIDI) is
OFF.
* The Performances, Patches, and Rhythms corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner's
manual.
BANK SELECT
| PROGRAM
| GROUP
MSB | LSB
| NUMBER
|
—————+———————————+———————————+——————————————————————+———————————
000 |
| 001 - 128 | GM Patch
:
|
|
|
063 |
| 001 - 128 | GM Patch
085 | 000
| 001 - 064 | User Performance
| 032
| 001 - 064 | Card Performance
| 064
| 001 - 064 | Preset Performance
086 | 000
| 001 - 032 | User Rhythm
| 032
| 001 - 032 | Card Rhythm
| 064
| 001 - 040 | Preset Rhythm
087 | 000
| 001 - 128 | User Patch
| 001
| 001 - 128 | User Patch
| 032
| 001 - 128 | Card Patch
| 033
| 001 - 128 | Card Patch
| 064
| 001 - 128 | Preset Patch A
| 065
| 001 - 128 | Preset Patch B
|
:
|
|
092 | 000 -
| 001 -
| SRX Rhythm
|
:
|
|
093 | 000 -
| 001 -
| SRX Patch
|
:
|
|
120 |
| 001 - 057 | GM Rhythm
121 | 000 -
| 001 - 128 | GM Patch
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
| NUMBER
|
| 001 - 256
|
| 001 - 256
| 001 - 064
| 001 - 064
| 001 - 064
| 001 - 032
| 001 - 032
| 001 - 040
| 001 - 128
| 129 - 256
| 001 - 128
| 129 - 256
| 001 - 128
| 001 - 128
:
|
| 001 -
:
|
| 001 -
:
|
| 001 - 009
| 001 - 256
❍Modulation (Controller number 1)
Status
2nd byte
BnH
01H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Modulation depth:
00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Modulation parameter
(PERFORM/MIDI) is OFF.
❍Breath type (Controller number 2)
Status
2nd byte
BnH
02H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127)
❍Foot type (Controller number 4)
Status
2nd byte
BnH
04H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127)
❍Portamento Time (Controller number 5)
Status
2nd byte
BnH
05H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Portamento Time:
00H - 7FH (0 - 127)
* In Performance mode the Part Portament Time parameter (PERFORM/PART) will
change.
❍Data Entry (Controller number 6, 38)
Status
2nd byte
BnH
06H
BnH
26H
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
❍Volume (Controller number 7)
Status
2nd byte
BnH
07H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Volume:
00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Volume parameter (PERFORM/
MIDI) is OFF.
* In Performance mode the Part Level parameter (PERFORM/PART) will change.
❍Balance (Controller number 8)
Status
2nd byte
BnH
08H
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Balance:
00H - 7FH (0 - 127)
❍Panpot (Controller number 10)
Status
2nd byte
BnH
0AH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Panpot:
00H - 40H - 7FH (Left - Center - Right),
* Not received in Performance mode when the Receive Pan parameter (PERFORM/MIDI)
is OFF.
* In Performance mode the Part Pan parameter (PERFORM/PART) will change.
❍Expression (Controller number 11)
Status
2nd byte
BnH
0BH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Expression:
00H - 7FH (0 - 127)
* Not received when Tone Receive Expression parameter (PATCH/GENERAL or
RHYTHM/GENERAL) is OFF.
* Not received in Performance mode when Receive Expression parameter (PERFORM/
MIDI) is OFF.
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
245
Publicité
Table des Matières
