Mains Connection - KERN MPC M Serie Mode D'emploi

Refitting Procedure:

Mount tripod (1) on tripod
holder (2) at weighing
platform
Ensure that the cable (3)
does not get clamped!

Fasten tripod, using 4 screws

10.5 Mains connection

Power is supplied by the external power unit which also serves to isolate the mains
supply from the scale. The stated voltage value must be the same as the local
voltage.
Always use genuine approved KERN power pack units as per EN 60601-1 directive.
The small sticker attached to the side of the display unit indicates the power port:
The LED remains illuminated as long as the weighing scale remains connected to the
mains.
The LED display informs you during loading about the loading status of the
rechargeable battery.
green: Rechargeable battery is completely discharged
blue: Charging rechargeable battery
26 MPC_M / MPE_HM / MPE_PM-BA-e-1414