Electromagnetic Interferences - KERN MPC M Serie Mode D'emploi

8.2 Electromagnetic interferences

Guidelines and manufacturer's declaration – electromagnetic interferences
The floor scales MPC/MPE is designed for use in an electromagnetic environment that meets
the requirements stated below. The customer or user of the medical electrical device must
ensure that operation takes place in such an environment.
Emitted interference
measurements
HF emissions
as per CISPR 11 / EN 55011
HF emissions
as per CISPR 11 / EN 55011
Emission of harmonics
as per IEC 61000-3-2
Emission of voltage fluctuations /
flicker
as per IEC 61000-3-3
Do not put the floor scale MPC/MPE directly next to other devices and do not stack it
with other devices. If this type of operation is necessary, observe the floor scale
MPC/MPE to ensure normal operation in such an arrangement.
18
Conformity Electromagnetic environment -
guideline
Group 1 The floor scales MPC/MPE uses
HF energy merely for its internal
working. Its HF emission therefore
is very low and it is highly unlike to
interfere with adjacent electronic
devices.
Class B The floor scales MPC/MPE is
designed for use in all equipment
including those in living areas and
those connected directly to the
Class A
public power grid that also supplies
buildings used for living purposes.
Conforms with
MPC_M / MPE_HM / MPE_PM-BA-e-1414