KERN MPC M Serie Mode D'emploi page 112

KERN MPE

Press
will appear
KERN MPC
Press
appear

Press


Operate adjustment switch; for position see chap.16


Press

To confirm, press
will appear

Ensure that there are no objects on the weighing pan.

Wait until the stability display „STABLE" is displayed and then
confirm by pressing

The size of the currently set adjustment weight will be
displayed.
To change, select the digit to be altered by
(example)
numerical value by

Confirm by pressing
will be displayed.
54
, and
, and
, „P2 CAL" will be displayed
Press (MPE) or
repeatedly until „CAL" will be displayed.
MPC_M / MPE_HM / MPE_PM-BA-e-1414
one after the other and [P1 SPd]
one after the other and [P1 SPd] will
(MPC) and [dESC] will appear
(MPE) or (MPC) and [UnloAd]
(MPE) or (MPC).
.
(MPE) or (MPC) and [LoAd]
, and the