Tripp-Lite B004-2DUA2-K Manuel De L'utilisateur page 14

Basic Operation
Port Switching Hotkeys
To switch functionality between ports, a keyboard hotkey command is entered that
determines what port is accessed and which functionality is assigned to it. This
command starts by pressing [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. [Scroll Lock]
[Scroll Lock] is used by default. To toggle between these two, see Alternate Port
Switching Hotkey Command in the Hotkey Setting Mode section of this manual.
The table below contains the Port Switching Hotkeys used to determine what port is
accessed and which functionality is assigned to it.
Note: The table below uses the [Scroll Lock] [Scroll Lock] preceding sequence. Simply substitute
[Ctrl][Ctrl] if you decide to change the Hotkey Preceding Sequence.
Hotkey Command
[Scroll Lock] [Scroll Lock] [Enter]
[Scroll Lock] [Scroll Lock] [K] [Enter]
[Scroll Lock] [Scroll Lock] [U] [Enter]
[Scroll Lock] [Scroll Lock] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [U] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [U] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [U] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [U] [Enter]
[Scroll Lock] [Scroll Lock] [A] [Enter]
[Scroll Lock] [Scroll Lock] [A] [n]* [Enter]
* [n] stands for the port number of the computer that you are switching to, or the number of
seconds (from 1 to 99) that an Auto Scan remains on each port.
Action
Switches focus of the KVM, Audio and USB
from the port that currently has the KVM
focus to the port that follows it. (e.g. 1 to 2,
2 to 3, etc.)
Switches focus of the KVM only from the port
that currently has the KVM focus to the port
that follows it.
Switches focus of the USB only from the port
that currently has the USB focus to the port
that follows it.
Switches focus of the Audio only from the
port that currently has the Audio focus to the
port that follows it.
Switches focus of the KVM, Audio and USB to
the selected port number.
Switches focus of the KVM only to the se-
lected port number.
Switches focus of the USB only to the se-
lected port number.
Switches focus of the Audio only to the se-
lected port number.
Switches focus of the KVM and USB to the
selected port number.
Switches focus of the KVM and Audio to the
selected port number.
Switches focus of the USB and Audio to the
selected port number.
Switches focus of the KVM, Audio and USB to
the selected port number.
Initiates Auto Scan mode at the default inter-
val of 5 seconds per port. Press the [Esc] or
[Spacebar] key to exit Auto Scan mode.
Initiates Auto Scan mode at the selected time
interval. Press the [Esc] or [Spacebar] key to
exit Auto Scan mode.
14