Tripp-Lite B004-2DUA2-K Manuel De L'utilisateur page 11

Installation
Quad-View Mode Installation
Refer to the following steps and diagram to set up your KVM switch Quad-View Mode
installation.
Notes:
1. Before making any connections, ensure power to all devices being connected to the KVM switch
is turned off. Unplug the power cords of any computers that have the Keyboard Power On
function.
2. In Quad-View Mode, the keyboard and mouse console ports on the Client KVM are disabled, as
are the front-panel pushbuttons of the Client KVM.
3. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is
the same except there are fewer ports.
3 4 8
7
18
1
5 6 2
18
1
Connect the RJ45 QUAD port on one Dual Display KVM switch to the RJ45 QUAD
port on a second Dual Display KVM switch.
2
Flip the Quad-View Mode Switch of one KVM to the Host position, and the switch of
the other KVM to the Client position.
3
Connect a monitor to the DVI console A port on the back panel of the Host
KVM switch.
4
Connect a monitor to the DVI console B port on the back panel of the Host
KVM switch.
5
Connect a monitor to the DVI console A port on the back panel of the Client
KVM switch.
6
Connect a monitor to the DVI console B port on the back panel of the Client
KVM switch.
7
Connect a USB keyboard and mouse to the corresponding USB keyboard and
mouse console ports on the back of the Host KVM switch. The USB keyboard and
mouse console ports on the back of the Client KVM switch can remain open.
9 8
HOST KVM
CLIENT KVM
11
COMPUTER 1
11 12 13 14 15 16