Tripp-Lite B004-2DUA2-K Manuel De L'utilisateur page 10

Installation
7
Connect the other end of the KVM Cable Kit to the corresponding ports on the
computer you wish to add to the installation.
Note: The B004-2DUA2-K and B004-2DUA4-K come with 6 ft. Cable Kits. If you need a
longer cable, use a P759-Series DVI/USB + Audio KVM Cable Kit (sold separately), available in
lengths up to 15 ft.
8
Connect a DVI cable to the DVI B port on the back of the KVM, and then into a
DVI port on the computer being added to the installation.
Note: The B004-2DUA2-K and B004-2DUA4-K come with 6 ft. DVI-D Dual Link Cables. If you
need a longer cable, use a P560-Series (DVI-D Dual-Link) or P561-Series (DVI-D Single-Link
cable (sold separately), available in lengths up to 10 ft.
9
Repeat steps 6 through 8 for each additional computer you are adding to the
installation.
10
Connect the included power supply to the KVM switch, and then plug it into an
appropriate power source. To help protect your system from sudden transient
increases and decreases in electrical power, it is recommended that you plug your
devices into a Tripp Lite surge protector, line conditioner, or uninterruptible power
supply (UPS).
11
Turn on the power to all connected devices.
10