Lenze EVS9321 Instructions De Montage page 151

Fuses and cable cross-sections for the DC supply

Stop!
ƒ
ƒ
9300
Type
EVS9327-xx
EVS9328-xx
EVS9329-xx
1)
The specifications are recommendations. Other designs/laying systems are possible.
The cable cross-sections apply under the following conditions: Use of PVC-insulated copper leads, conductor
temperature < 70 °C, ambient temperature < 40 °C, no bundling of cables or cores
The cable cross-section is limited by the cable entries at the drive controller.
2)
The rated currents of the fuses EFSGR0xx0AYHx and EFSGR0xx0AYIx of Lenze are given. When using other fuses,
other fuse currents and cable cross-sections may arise.
National and regional regulations must be observed
EDKVS9332X DE/EN/FR 2.0
Basic devices in the power range 15 ... 30 kW
Only use semiconductor fuses.
On principle, fuse DC cables as 2-pole (+U
DC fuse 14 × 51
(EFSGR0xx0AYHx)
2)
Rated fuse current
[A]
–
–
–

Electrical installation
Mains connection, DC supply
, -U ).
G G
DC fuse 22 × 58 Installation in
accordance with
(EFSGR0xx0AYIx)
EN 60204-1
2)
Rated fuse current
Laying system
B2
[A] [mm
80 35
100 –
2 × 80 –
http://www.DataSheet4U.net/
Installation in
accordance
1)
with UL
+U , -U +U , -U
G G G G
C
2 2
] [mm ] [AWG]
25 1
35 1
2 × 25 2 × 3
151
4
datasheet pdf - http://www.DataSheet4U.net/