Timer Function; Swing Function - FUAVE ACG12K02 Manuel D'instructions

3. Ventilation function
• Press the 'Mode' button until the 'Fan' light is shown on the display.
• The display shows 25°C.
• Set the power to low, medium or high with the 'Speed' button.
• The temperature cannot be changed.
4. Timerfunction
Automatic start:
• First set at which temperature and in which mode (cooling,
dehumidifying or ventilating) you want the air conditioner to start.
• Switch off the air conditioner using the <On/Off> button. Now the air
conditioner is in the stand-by position.
• Press the <Timer> button.
• Using the <Up> and <Down> buttons, set the number of hours after
which the air conditioner has to start (1-24 hours).
• Press the <Timer> button once again. The displays of the air
conditioner and the remote control show the set number of hours. The
air conditioner will automatically start with the entered settings after the
lapsing of the set number of hours.
Automatic stop:
• Press the <Timer> button while the air conditioner is operating.
• Using the <Up> and <Down> buttons, set the number of hours after
which the air conditioner has to stop (1-24 hours).
• Press the <Timer> button once again. The displays of the air
conditioner and the remote control show the set number of hours.
The air conditioner will automatically stop after the lapsing of the set
number of hours.

5. Swing function

• Press the 'Swing' button, the light on the display lights up.
• The flap on top swings continuously from the top to the bottom.
• By pressing the button again you switch off the function.
• The flap remains in the last position.
40