FUAVE ACG12K02 Manuel D'instructions page 37

• Mounting the air discharge hose
Insert the air discharge hose of the air conditioner through the opening
in the window seal. Subsequently close the zipper until the air discharge
hose is positioned tightly. The window seal is now ready for use.
• Turn clockwise the connector for the
air conditioning on one end of the
drain hose.
• Slide the connector for the air
conditioner into the appropriate
slot on the rear of the unit.
• You can also hang the outlet hose
out of an open window; this method
is less efficient however.
• Avoid bends or pinches in the pipe. These will lead to a build-up of
damp, waste air which can cause leaks, overheating or lead to the air
conditioning unit switching off.
34