Timer Function - FUAVE ACB12K02 Manuel D'instructions

3. Ventilation function
• Press the 'Mode' button until the 'Fan' lamp is shown on the display.
• The display shows 25°C.
• Set the power to low or high with the 'Fan Speed' button.
• The temperature cannot be changed.
4. Timerfunction
Automatic start:
• First set at which temperature and in which mode (cooling,
dehumidifying or heating) you want the air conditioner to start.
• Switch off the air conditioner using the <On/Off> button. Now the air
conditioner is in the stand-by position.
• Press the <Timer> button.
• Using the <Up> and <Down> buttons, set the number of hours after
which the air conditioner has to start (1-24 hours).
• Press the <Timer> button once again. The display of the air conditioner
shows the set number of hours.
The air conditioner will automatically start with the entered settings after
the lapsing of the set number of hours.
Automatic stop:
• Press the <Timer> button while the air conditioner is operating.
• Using the <Up> and <Down> buttons, set the number of hours after
which the air conditioner has to stop (1-24 hours).
• Press the <Timer> button once again. The display of the air conditioner
shows the set number of hours.
The air conditioner will automatically stop after the lapsing of the set
number of hours.
5. LED display
The display shows the configured temperature or the timer settings. The
display also shows the error codes, see further on in this manual.
39