Special Accessory Installation - Truma Mover XT Mode D'emploi / Instructions De Montage

Special accessory installation

1. 30 mm spacer set
For compensating for height on caravans / trailers with a
frame height of < 140 mm down to 110 mm,
part no. 60030-95000.
Fig. 9
2. 60 mm spacer set
For compensating for height on caravans / trailers with a
frame height of < 110 mm down to 80 mm,
part no. 60030-95100.
Fig. 10
3. Low chassis kit
For compensating for height on caravans / trailers with a
frame height of less than 80 mm and / or for bridging struts,
part no. 60010-64900.
Fig. 11
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
4. Low chassis kit, short
Fig. 12
For compensating for height on caravans / trailers with
a frame height of less than 80 mm,
part no. 60030-37600.
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
22
5. AL-KO Vario III / AV Installation Kit
Essential for caravans with AL-KO Vario III / AV Chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Fig. 13
6. AL-KO Chassis M adapter kit for chassis with an off-
set axle and a permitted gross weight of up to 1800 kg
Mounting set for compensating for frame edges for cara-
vans with AL-KO Chassis M. The mounting set is needed for
mounting in front of the axle, part no. 60030-38600.
Fig. 14
7. AL-KO Chassis M adapter kit for chassis with a con-
tinuous frame and a permitted gross weight of
1900 kg to 2000 kg
Mounting set for compensating for frame edges for cara-
vans with AL-KO Chassis M. The mounting set is needed for
mounting in front of the axle, part no. 60031-02000.
Fig. 14 a
8. Mover® mounting set for Eriba Touring
Part no. 60030-09000
Fig. 15
9. Eriba Troll mounting set
Part no. 60031-03000
The Eriba Troll Mounting Set allows the Mover® to be mount-
ed behind the axle on an Eriba Troll caravan / trailer.
Fig. 15a
In some cases installation is not possible because of the
design of the sub-frame. Contact your dealer if necessary.