Care And Maintenance; Cleaning The Hook Race And Feed Dogs; Replacing The Bobbin Holder - ELNA elnaStar Livret D'instructions

z
q
x
w
c
w
r
v
b
z
x
c
r
e

CARE AND MAINTENANCE

Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
Clean the outside of the machine with a soft cloth and
mild soap.

Cleaning the Hook Race and Feed Dogs

z Remove the presser foot and needle. Remove screw
x Lift up the bobbin holder and remove it.
c Brush out dust and lint. Wipe the bobbin holder with
e
v Clean the feed dogs and hook race with the lint
b Wipe the hook race with a soft, dry cloth.
NOTE:
You may also use a vacuum cleaner.
t

Replacing the Bobbin Holder

z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits next to
w
q
c Replace the bobbin.
e
66
WARNING:
on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin.
q Screw
w Bobbin holder
a soft, dry cloth.
brush.
e Lint brush
r Feed dog
t Hook race
the stopper on the race.
q Knob
w Stopper
Attach the needle plate, inserting the two guide pins
into the holes in the needle plate. Tighten the
screw firmly with the screwdriver.
e Guide holes
r Screw