Operating The Scale In A Wireless Group (Menu); Activating The Wireless Module (Sys); Setting Up A Wireless Group (Lrn) - Seca 677 Mode D'emploi Et Garantie

7.2 Operating the scale in a wireless group (menu)

......
rF
......
Activating the wireless
module (SYS)
Setting up a wireless
group (Lrn)
82 •
All the functions you need to operate the device in a
seca wireless group can be found in the "rF" submenu.
Information for navigating in the menu can be found on
Page 75.
learn Group (ID)
• on
Autosend
• off
• on
System
• off
• HI
• MA
Autoprint
• HI_MA
• off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module deacti-
vated. You have to activate it before you can set up a
wireless group.
1. Switch on the device.
2. Select the "SYS" menu item from the "rF"
submenu.
3. Confirm your selection.
4. Select the "on" setting.
5. Confirm your selection.
You exit the menu automatically.
To set up a wireless group, follow the instructions
below.
1. Switch on the device.
2. Call up the menu.
3. Select the item "rF" from the menu.
4. Confirm your selection.
5. Select the "lrn" (learn) menu item from the "rF"
submenu.
6. Confirm your selection.
• Channel 1 (C1)
Stop
• Channel 2 (C2)
• Channel 3 (C3)
Reg. Devices (M)