Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10
Apply the grease evenly.
GRINDER MAINTENANCE
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. Empty the coffee bean hopper
The screw could fall into the grinder; if it happens remove it before restarting the machine. Protect the
grinder hole with a cloth to avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed. Be sure to empty the coffee bean hopper before starting. Note: the screw could
fall into the grinder; if that happens, be sure to remove it before continuing the cleaning.
1
Unscrew the screw that holds the
service door closed.
Then reposition the door and attach it with the previously removed screw.
11
Insert the washed and dried Brew
Group. DO NOT PRESS THE
"PUSH" BUTTON.
2
Remove screws and service door.
12
Insert the coffee grounds drawer.
Close the service door.
3
Adjust until it clicks.
43
Publicité
Chapitres
Table des Matières
