Technical Data - Saeco Primea Touch Plus Mode D'emploi

GUIDE MESSAGE THAT APPEARS
change acqua prima filter
the cleaning cycle has not been completed
correctly
insert milk container with cappuccinatore
rinse the milk tank
descale the machine
energy saving

TECHNICAL DATA

Nominal voltage
Power rating
Power supply
Shell material
Size (w x h x d)
Weight
Cable length
Control panel
Water tank
Milk Tank
Coffee Bean Hopper Capacity
Pump pressure
Boiler
Coffee grinder
Pressure safety device
Temperature safety device
Subject to engineering and manufacturing changes due to technological developments.
The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92)
concerning electromagnetic compatibility.
ERROR CODES / TECHNICAL DATA
HOW TO REMOVE THE MESSAGE
The Aqua Prima filter must be replaced in the following
cases:
1. 60 liters of water has been dispensed;
2. 90 days have passed since its installation;
3. 20 days have passed and the machine has not been
used.
Note: this message appears only when "inserted" has
been selected in the water filter function (See page 19).
Repeat the operation as described in the appropriate
section.
Insert the cappuccinatore in the milk container. Without
the cappuccinatore no beverage containing milk can be
dispensed.
The user must wash the milk tank after it has been used.
A descaling cycle must be performed on the machine's
internal circuits.
Press the "start" button
See label on the appliance
See label on the appliance
See label on the appliance
Plastic
355 x 380 x 460 mm - 13.8" x 15.4" x 16.9"
14 Kg - 30.9 lbs
1200 mm - 42.2"
(Digital) Front
2 liters - 68 oz. / Removeable
ca. 0.400 liters - 12.5 oz. / Removeable
350 grams - 8.9 oz. / of coffee beans
15 bar
Two in stainless steel
With ceramic grinders
Boiler pressure safety valve
Boiler thermostats and thermal fuses
45