Coffee Circuit Cleaning Cycle (Brew Group Wash Cycle); Block Display - Saeco Primea Touch Plus Mode D'emploi

COFFEE CIRCUIT CLEANING CYCLE (BREW GROUP WASH CYCLE)

To clean the machine's internal circuit used for brewing coffee.
It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly.
Packages of Saeco detergent tablets may be purchased at your local dealer or by Authorized Service Centres.
Note: before performing this function make sure that:
1. a large enought container is positioned under the spout.
2. has been inserted into the compartment for pre-ground coffee.
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
Press the "coffee cleaning cycle" button and then "start cleaning" to start the wash cycle.
coffee
cleaning
cycle
THE MAINTENANCE AND CLEANING OF THE
BREW GROUP IS DESCRIBED ON PAGE 42.

BLOCK DISPLAY

To clean the display. The touch screen display can be cleaned with a soft dampened cloth or with the appropriate
detergents for cleaning displays sold on the market.
SOLVENTS, ALCOHOL, HARSH DETERGENTS AND/OR SHARP OBJECTS THAT CAN DAMAGE THE DISPLAY MUST
NOT BE USED.
Press the "lock display" button
1
lock
display
To reactivate the display, press "unlock" on the lower right-hand corner and then
(within two seconds) "unlock" in the upper left-hand corner (this button appears
only after having pressed the previous button).
start
cleaning
display
locked
unlock
cleaning coffee circuit –
please wait
cleaning...
Wait for the cycle to fi nish. The machine will
return to the main menu.
2
unlock
display
locked
31