Adjustments; Coffee Intensitiy; Adjusting The Height Of The Drip Tray; Filling The Milk Container - Saeco Primea Touch Plus Mode D'emploi

COFFEE INTENSITIY

The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply
turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.
SBS – SAECO BREWING SYSTEM
SBS adjusts the intensity of the brewed coffee,
and can even be adjusted while brewing. Any
adjustment has an immediate effect on the
brewing coffee.

ADJUSTING THE HEIGHT OF THE DRIP TRAY.

Adjust the drip tray before dispensing any beverages.

FILLING THE MILK CONTAINER

Only the container with the cappuccinatore must be fi lled before preparing beverages with milk. Do not
use milk after the best-before date.
of the cappuccinatore on page 40).
1
Open the milk compartment and
remove the container located
within.
COFFEE
Height adjustable drip tray.
To raise the drip tray, press lightly on the lower part of the button. To lower the tray,
press lightly on the upper part of the button; when the desired height is reached,
release the button.
Note: There is a red fl oater in the drip tray. When it rises, the tray must be emptied
and washed.
(Important! Refer to the instructions for maintenance and cleaning
2
Remove the container cover and pour in the milk. DO NOT
EXCEED THE MAXIMUM LEVEL shown in the fi gure. Close
the container and place it back in the milk compartment.
Make sure to carefully close the compartment.

ADJUSTMENTS

MEDIUM
COFFEE
MILD STRONG
COFFEE
We recommend using the other
supplied container to store any
remaining milk in the refrigerator.
Clean the circuits using only the
container with the cappuccinatore.
9