Maintenance; Milk Circuit Rinse Cycle - Saeco Primea Touch Plus Mode D'emploi

MAINTENANCE

To clean/maintain all of the machine's internal circuits, press the "maintenance" button on the main menu.
lock the Touch Screen (to
preform cleaning of the display).
begin washing the milk
begin rinsing the milk

MILK CIRCUIT RINSE CYCLE

To rinse the machine's internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If this rinse cycle is not performed, the machine comes to a halt and does not allow the dispensing of milk-based
beverages.
Before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been adequately cleaned of all milk residue and contains fresh drinking water.
3. the water tank contains a suffi cient quantity of water.
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
milk circuit
start
rinsing
rinsing
cycle
In this menu you can:
lock
display
milk
cleaning
circuits.
cycle
milk circuit
rinsing
circuits.
cycle
go back
Wait for the cycle to fi nish.
The machine will return to the main
menu.
coffee
cleaning
cycle
maintenance
descaling
cycle
back to
menu
rinsing milk circuit-
please wait
rinsing...
begin the wash cycle of the brew
group.
perform the descaling cycle.
Remove the container, rinse and
dry.
27