Connection Of The Foot Switch For Controlling The Compressed Air - Amann Girrbach ceramill multi-x Mode D'emploi

U S e r M a n U a L
gB
Mount the vertical pantograph with the included screw CN
upon the machine. The complete device comes with the
handpieces already integrated.
For the upgrade kit: Insert scanner BL and milling handpiece BM
for milling on the righthand side into the appropriate mounts.
Place the sensing BL and milling hand pieces in the appropriate
holders. Clip the blow-out nozzle BN onto the appropriate holder
and adjust its position.
30
Detach the connection of the milling unit and the connection
of the blow-out nozzle DU , EL from the base plate.
4.3 ConneCtIon oF the Foot SwItCh For
ControLLIng the CoMPreSSeD aIr
Switch off the compressed air and detach the compressed
air connection DT to the device.
a
Foot switch for the fixation of the spherical shell table.
Connect the hoses to the foot switch as shown.
B