Factor printed upon the blank form.
7.2
MICroMeter SCrew
Loosen the upper screw of the milling guide BP with 1/2 to 3/4
of a turn.
Loosen the lower screw of the milling guide with 1/2 to 3/4 of
a turn.
CaUtIon! Do not loosen any other screws!
Upgrade kit
Multi-x
CaUtIon! Do not loosen any other screws, in particular not
those at the micrometer screw (see image)!!!
The value for the multiplier indicated on the blank form is adjus-
ted using the two micrometer screws BU manually or using a hex
wrench.
During adjustment of the multiplier value, do not hold or pull
the handpiece.
U S e r M a n U a L
gB
35