Safety Procedures; Hints To The Type Plate - probst AKZ-UNI-850 Instructions De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
Maintenance and care
6.4

Safety procedures

It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ DGUV norm 100-500).
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at:
service@probst-handling.de
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a clearly
visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has been done.
The check by an expert must be proved!
Device
Year
6.5

Hints to the type plate

Type, serial-number and production year are very important for the identification of your device. If you
need information to spare-parts, warranty or other specific details please refer to this information´s.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled
with the device. Do not exceed this carrying capacity/working load limit (WLL).
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
5610XXXX-YYYY
Date
24 / 26
Expert
Company
GB

Publicité

Table des Matières
loading

Table des Matières