Hydraulic - probst AKZ-UNI-850 Instructions De Montage

Maintenance and care
6.1.2

Hydraulic

Service interval
First inspection after
25 operating hours
All 50 operating hours
5610XXXX-YYYY
Maintenance work
•
Control and tighten all hydraulic thread joints and connection.
(The implementation is only allowed by an expert).
•
Tighten all hydraulic connections.
•
Check the hydraulic system for leaks.
•
Check the hydraulic oil filter, clean it if necessary (if available).
•
Check the hydraulic oil and replace it in accordance to the manufacturer information
(recommended hydraulic oil: HLP 46 according to DIN 51524 – 51535).
•
Check the hydraulic hoses for breaks and abrasion.
Damaged hydraulic hoses must be replaced
(generally it is recommended to replace hydraulic hoses every 6 years).
•
Only specified types of oil may be used!
22 / 26 GB