General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop 1341088 Notice D'utilisation

General information

1. General information
The original operating instructions were drafted in
German.
The operating instructions in other languages have
been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the deriva-
tive temperature control set for the Regudis W-HTU,
Regudis W-TU, Regudis W-HTO, Regudis W-HTF
and Regudis W-HTO Duo dwelling stations.
1.2

Extent of supply

Please check your delivery for any damage caused
during transit and for completeness.
Items included in the delivery:
• Derivative temperature control set
• Operating instructions
• Seals (supplied with item no. 1341088, 1341188
and 1341087)
1.3

Contact

Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
Technical service
Phone: +49 (0) 29 62 82-234
1.4

Copyright and protective rights

These operating instructions are copyrighted. They
are exclusively designed for persons involved with
the product.
1.5

Symbols used

Highlights important information and further
explanations.
Action required
f
• List
1.
Fixed order. Steps 1 to X.
2.
Result of action
Z
12
Derivative temperature control set
2.

Safety-related information

2.1

Normative directives

Observe the legal requirements applicable at the
installation location.
The current standards, rules and guidelines apply.
2.2

Correct use

Operating safety is only guaranteed if the product is
used correctly.
Outside the heating mode, the derivative temperature
control set maintains the temperature in the prima-
ry supply at a sufficiently high level so that a quick
supply of hot water is guaranteed.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer and/
or his authorised representatives due to damage
caused by incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.3

Modifications to the product

Modifications to the product are not permitted. In
case of modifications to the product, the warranty
will become void. The manufacturer will not accept
liability for damage and breakdowns caused by mod-
ifications to the product.
2.4

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
2.5

Safety notes

We have developed this product in accordance with
current safety requirements. Please observe the
following notes concerning safe use.
134108880-V01.11.2020