Instructions for installation and use
Suitable infrared heaters: DIR-350-R, WIR-350-R, DIR-500-R,
WIR-500-R, DIR-750-R, WIR-750-R, DIR-1300-R, WIR-1300-R,
ECO-350-R, ECO-350-G, ECO-500-R, ECO-500-G, ECO-750-R,
O-IRC-W
Suitable infrared plates: IR-WP-175, IR-WP-100, IR-WP-390,
IR-WP-510, IR-WPHL-510, IR-WPHL-100, IR-WPHL-390, IR-WPHL-175
ATTENTION!
Only use infrared plates in connection with the optional WC4-IRF-F
foil sensors.
● Before using the controller for the first time, check that the cabin
is ready to operate. Particularly if the controller is switched on
by remotely.
● Only the mains connection cable provided or the optional one
for Switzerland (IR-CP-CH) may be used.
● The power supply unit may only be installed and operated
together with the control unit provided.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, in severe injuries or death.
p. 6/44