Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti PX 10 Mode D'emploi

11 Manufacturer's warranty - tools

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
en
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.

12 EC declaration of conformity (original)

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
EN 300 330‑1 V1.3.2, EN 300 330‑2 V1.1.1, EN 301 489‑1
V1.5.1, EN 301 489‑3 V1.4.1, EN ISO 12100, 2011/65/EU,
2006/95/EC, 2004/108/EC, 1999/5/EC.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
01/2012
18
Additional claims are excluded, unless mandatory na-
tional regulations prohibit such exclusion. In particu-
lar, Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Technical documentation filed at:
Transpointer
Hilti Entwicklungsgesellschaft mbH
PX 10
Zulassung Elektrowerkzeuge
2006
Hiltistrasse 6
86916 Kaufering
Deutschland
Matthias Gillner
Executive Vice President
Business Area Electric
Tools & Accessories
01/2012