Carel pR300T Mode D'emploi page 31

ENG
If choosing to use a pRack without built-in display (closed), to confi gure this connect the dedicated pGD
display and set the network address to 30. This can be done easily by pressing the UP + ENTER + DOWN
buttons together.
The network confi guration will be as illustrated in the following fi gure:
Fig. 7.c
ADVANTAGES: compared to parallel compression control using a digital input and output, this has the
advantage of preventing simultaneous compressor starts, we well as displaying the installed parallel
compression capacity; moreover, no additional confi guration is needed for activation and feedback.
15
+030220585 - 1.1 - 10.12.2015