Control Board Connected Via Plan - Carel pR300T Mode D'emploi

ENG
7.

CONTROL BOARD CONNECTED VIA PLAN

The parallel compression control board can be connected via network (pLAN) to the main pRack board.
This type of confi guration requires the use of a pR300T board for managing parallel compression, with the
same software version as used on the main board.
The network address of the parallel compression control board will be 9. When updating the software, using
pRack Manager, the user needs to choose the CLEARALL_ADD_9.DEV fi le in the column on the right:
+030220585 - 1.1 - 10.12.2015
Fig. 7.a
Fig. 7.b
14