How To Set Grace Time; How To Set The Operator Cards - BFT espas20 I Mode D'emploi

15.1 - HOW TO SET GRACE TIME

Grace time is a time value in minutes establishing how much time a customer have to
exit the car park since barcode printing.
ATTENTION! Grace Time must be set on the exit column.
INSTRUCTIONS:
- enter the menu and scroll with LEFT and RIGHT button up to viewing GRACE TIME
- press PUSH and change the value with UP and DOWN
- to confirm press PUSH
GRACE TIME = 000
10

15.2 - HOW TO SET THE OPERATOR CARDS

Operator Cards enable up to 99 operator's cards. 99 numbered positions are given to
associate the 125KHz cards, every number has a specific function:
Position
1,2,3,4
5,6,7,8
9,10,11,12
13,14,15,16
17...99
INSTRUCTIONS:
- Click to enter the menu and scroll with LEFT and RIGHT up to viewing Operator's card
- scroll the positions with UP and DOWN
- When the desired position is reached press push: at this point the value saved in the
position starts to flash: present to card which you want to enable to the reader
located on the front panel.
- Confirm with PUSH
OPERATOR CARDS
05.00000000 open
espas20 I - User Manual
GRACE TIME = 010
2
Function
Normal
Open
Closed
(automatic) loop
single passage (Free pass)
01.00000000 norm
05.10456985 open
PRESENT THE
CARD TO THE READER
rel. 11-2012
https://appceso.com
GRACE TIME = 008
05.00000000 open
4
OPEN GATE FUNCTION
GRACE TIME = 8
CARD OK
PAG. 34