Access To Menus - BFT MICHELANGELO 40 Instructions D'utilisation Et D'installation

Press the OK key
Control unit software version
N. total manoeuvres (in tens)
N. manoeuvres since latest maintenance (in tens)
N. radio control devices memorised
- +
- +
- +
- +

ACCESS TO MENUS

+/-
OK
OK
Logic
OK
OK
OK
OK
35.40
Scroll up
Scroll down
Confirm/Switch on display
See PARAMETERS MENU
See LOGIC MENU
See RADIO MENU
OK OK
Description
STOP input activation
EDGE input activated (obstacle alarm)
ampere-stop triggering (obstacle alarm)
encoder stopped detected (obstacle alarm)
PHOT input activation
FAULT input activation for checked photocells
TIMER input activation
waiting time for automatic closing on TIMER release
CLOSE input activation
OPEN input activation
STARTinput activation
barrier in opening position
barrier in closing position
reference input on opening activated
reference input on closing activated
overload signal indication (the system completes the manoeuvre in progress
and does not allow new ones until the signal indication has been eliminated).
check on safety devices failed
check on motor control failed
power supply cables for motor or encoder signal reversed
overload error (the system remains under protection lock until the error has
been corrected).
error due to position references both active.
Set torque threshold %
Maximum motor torque %
Cancel/return to main menu
MICHELANGELO -
23