Publicité
Les langues disponibles
Les langues disponibles
16 - MENU 2 PROGRAMMING
Parameter Description
INPUT
Display of I/O status
connected to the card: pho-
tocell, loop, etc... READING
ONLY
If the input is active the display
shows the related code (see
Values)
Language of the strings
LANGUAGE
displayed
Change with UP and
DOWN, confirm with PUSH
ADDR.485
Serial address of the station.
READING ONLY
GATE
Type and name of the station.
Change with UP and DOWN,
confirm with PUSH
HEATING
Temperature (in °C) under
THR.
which heating resistance is
triggered. Change with UP and
DOWN, confirm with PUSH
LOAD
Reset function of factory settings. To activate press PUSH. WARNING: the
DEFAULT
operation cannot be aborted.
ERASE
Function to cancel Flash memory data. To activate it press PUSH and confirm with
CARDS
PUSH. WARNING: the operation cannot be aborted.
FLASH
Function to cancel Flash memory data. To activate it press PUSH and confirm with
ERASE
PUSH.
WARNING: the operation cannot be aborted.
espas20 I - User Manual
Values
0=Request ticket pushbutton
2=Paper Fotocell
4=Presence loop
5=Safety loop
IT = ITALIANO
EN = INGLESE
FR = FRANCESE
ES = SPAGNOLO
-
IN1...IN3 = Entry 1, 2 o 3
EXIT1...EXIT3 = Exit 1,2 o 3
POS1...POS3=Desk Validator
1,2 o 3
COUNT1...COUNT3 = Kit
Capienza 1, 2 o 3
0...255
rel. 11-2012
https://appceso.com
Default
-
EN
-
IN1
15
PAG. 36
Publicité
Chapitres
