General Installation Instructions; Installation - Burkert 8600 Notice D'utilisation

3 INSTALLATION

3.1 Installation Instructions
The device must be protected from
prolonged heat radiation and other harmful
environmental influences (e.g. magnetic
field or prolonged insolation).
3.2 Installation (Fig. 1)
The type 8600 metering device is fitted
directly on to the solenoid valve (see Fig. 1)
and is fixed in place using the M 3x45 mm
socket head screw.
Rotating the terminal plate (Fig. 2)
Caution :
This should only be done when the device
is isolated from the supply.
Support the terminal plate from below using
a screwdriver blade and carefully lift it out.
The terminal plate can be rotated 2 x 900
from the standard position, in either
direction.
Note : Ensure that the cable ends are not
twisted off during this process.
Insert the terminal plate into the housing
until it locks into place.
8600
Fig. 1 Installing the metering device
Fig. 2 Rotating the terminal plate
°
2 x 90
-22-
°
2 x 90