Description; Type Designation; Structure And Measuring Principle; Dimensions - Burkert 8600 Notice D'utilisation

2 DESCRIPTION

2.1 Type Designation

Designation
8600 Compact Metering Device
1077-4 Operator unit for 8600

2.2 Structure and Measuring Principle

Structure
The type 8600 metering device comprises
an electronic unit in a plastic, splash-proof
casing. Degree of protection : IP65. The
device is mounted directly onto a Bürkert
solenoid valve and connected to a Bürkert
8020 flow sensor (design 8020 with coil).
The various connections are made by
means of a 7-pin terminal connected through
a PG 9 cable gland.

2.3 Dimensions

Without 1077-4 operator
unit
8600
Cable gland Identification Number
PG9
Measuring Principle
The metering device is an interface which
uses the frequency signal from the 8020 to
directly control the fill process via a solenoid
valve. The fill quantity and fitting factor (K)
(dependent on pipe diameter and material)
are input by means of the 1077-4 operator
unit. The fill process can be controlled either
via the operator unit or via binary inputs.
The metering devicerequires a voltage
supply of 24...48 V AC/CD to perate.
With 1077-4 operator unit
-20-
130429W
130447Y