Bitzer KT-600-4 Manuel D'installation page 34

2. Showing details of the calculation
The software suggests 3 compressors that can be used to achieve the specified capacity. Upon selecting the D
tab and clicking the
TAIL
selected compressors are displayed. Further information can be displayed by clicking the L
, I , D
MENSIONS NFORMATION
Fig. 6: The BITZER SOFTWARE suggests 3 compressors that can be used to achieve the specified capacity, here using a frequency inverter on
compressor 1.
The selected compressors can be changed manually in the menu on the left by clicking the arrows
compressor name and recalculated by clicking the
3. Selecting the accessories
In the upper menu bar, click the button for the accessory module
Information
The button for the accessory module will only become active after a previous calculation!
The Accessories window opens and suggests a VARIPACK frequency inverter for compressor 1 and a common re-
ceiver for all 3 compressors.
KT-600-4 // PDF Download
icon next to the points A (operating point) and B (start point), all calculation details of the
and T
OCUMENTATION RAINING
tabs.
button.
.
-
E
, T D , D
IMITS ECHNICAL ATA I
next to the
34
-