Connection; Connecting The Luminaire To The Mains Voltage (Mains Version); Connecting The Luminaire To The 24V Supply Voltage (Selv Version) - Waldmann ROCIA.focus RFD Mode D'emploi

ENG
5.

Connection

5.1 Connecting the luminaire to
the mains voltage (mains ver-
sion)
WARNING
Electric shock caused by ingress of
moisture. The plug has a lower degree
of protection than the luminaire.
Personal injury and damage to the lumi-
naire.
X Plug in mains plug away from a
moist environment.
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and
make sure that they are identical.
X Plug the mains plug into a socket.
22
5.2 Connecting the luminaire to
the 24V supply voltage (SELV
version)
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Connection by a skilled electrician
only.
X Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
X Operate the luminaire at safety
extra low voltage (SELV) only.
X USA and Canada: This device
must be connected to a class 2
power supply.
NOTICE
Material damage caused by ingress
of moisture.
Damage or destruction of the luminaire.
X Pass the connecting cable through
a cable gland that corresponds to
the degree of protection of the
luminaire.
NOTE: The function of the luminaire is
always guaranteed independently of the
terminal assignment.
X Connect both wires to a suitable power
supply.
Connection