Song And Style Makeup Tools; Before Saving Your Settings - Roland G-70 Mode D'emploi

Adding notes
If you press the [NOTE] field, the display changes to:
This pop-up window allows you to enter up to 10
notes for each position (see the [BAR], [BEAT] [CPT]
fields). The velocity values of the keys you press are
also adopted.
• To enter chords: press and hold the key of at least
one constituent note, then press the remaining keys.
Any key you press after releasing the keys of notes
already entered in the "table" replaces the "old"
notes.
• Press one of the note icons to specify the duration of
the note(s) shown in the "table". This is possible both
before and after playing the required note(s) on the
keyboard.
• Press the [EXECUTE] field to confirm your settings
and add the new note (or chord).

Song and Style Makeup Tools

Changes made to a song or Style using the Makeup
Tools can now be "computed" into that file and there-
fore become "regular" song or Style data:

Before saving your settings

Before saving your "made-up" song or Style to the
internal memory, a card or a floppy disk, you can (but
you don't have to) "commit" your changes, thereby
turning them into "regular" song or Style data.
(MAKEUP TOOLS settings are SysEx data only the G-70
understands.)
This may come in handy for two reasons:
• To be able to edit the "final" version of your song or
Style with the 16-track Sequencer, Style Converter or
Style Composer. Those functions ignore the "cos-
metic" SysEx data you add using the MAKEUP TOOLS.
• To play back your new song version on another
sequencer or your computer. (The Styles can only be
read by the G-70 anyway.)
To commit your changes, press the [FREEZE¥DATA]
field on any of the pages discussed so far:
G-70 Music Workstation
The display responds with "Operation Complete"
when the data have been converted. Careful: this
operation cannot be undone.
Note: This operation is unnecessary for files you only want to
use with the G-70.
r
OS Version 2
15