ESAB PT-35 Manuel D'instruction page 96

SECTION 5
WARNING
Make sure that the power
source has been turned off
and that primary power
has been disconnected
before proceeding.
6. Removal and Replacement of the Torch Body
PT-35 Torch
1. Unscrew the right hand threaded handle (clockwise) from the torch body and slide
it back onto the torch cable assembly in order to expose the torch connections.
Handle
2. Unscrew the main power cable fitting from the torch's power lead by using a
7/16" (11.11 mm) and an adjustable wrench. Apply pressure to the 7/16" wrench in
direction shown by the arrow.
Main Power Cable
7/16"
96
MAINTENANCE
Torch Body
Adjustable wrench